Abstract Machines logoHardware

Use Cases

Real-world applications of A0 IoT Gateway

Use Cases

The A0 IoT Gateway is an ESP32-C6 (RISC-V, Wi-Fi 6, Bluetooth 5 LE, 802.15.4) base board with two expansion slots (BUS1/BUS2) for SIM7080G (NB-IoT/LTE-M + GNSS), WMBUS (Wireless M-Bus metering), and E07-400M10S (sub-GHz 400 MHz) modules. Power via USB-C, external supply, or battery with charging. Software: Zephyr RTOS, WAMR WebAssembly edge logic, Magistrala (MQTT/CoAP/HTTP/WebSockets) integration, with secure boot, flash encryption, and TEE.

Smart Metering

Residential Utility Monitoring

Challenge: Remotely monitor heat and water usage across apartment blocks with Wireless M-Bus meters.

Solution:

  • Deploy A0 gateway per block
  • Read meters via WMBUS module — no rewiring
  • Backhaul via NB-IoT (SIM7080G)
  • Publish to Magistrala over MQTT
  • Battery-backed operation for resilience

Benefits:

  • No truck rolls for meter reading
  • Real-time consumption monitoring
  • Leak detection and anomaly alerts

District Heating Network

Challenge: Monitor temperature, flow, and energy across distributed heat meters.

Solution:

  • A0 gateways at strategic points
  • Collect from Wireless M-Bus heat meters
  • Edge filtering/aggregation via Wasm workloads
  • Cellular backhaul where no wired connectivity exists

Benefits:

  • Optimized energy distribution
  • Rapid leak detection
  • Improved billing accuracy

Industrial IoT

Sensor Data Collection

Challenge: Collect sensor data in secure, bandwidth-constrained industrial environments.

Solution:

  • A0 with Wi-Fi 6 / BLE / 802.15.4 for local sensor links
  • Wasm edge logic for filtering and threshold alerts
  • Encrypted uplink via NB-IoT or Wi-Fi to Magistrala
  • OTA updates and remote management

Benefits:

  • Secure edge-to-cloud communication
  • Reduced uplink bandwidth via edge processing
  • Local operation during network outages

Facility Energy Monitoring

Challenge: Monitor energy consumption across a facility using wireless metering.

Solution:

  • A0 gateways at distribution points
  • Wireless M-Bus metering radios
  • Real-time upload to building/energy management via Magistrala

Benefits:

  • Identify energy waste
  • Peak demand insight
  • Cost optimization

Smart Cities & Remote Monitoring

City-Scale Metering

Challenge: Large-scale metering with NB-IoT and sub-GHz coverage.

Solution:

  • WMBUS or sub-GHz (E07-400M10S) for meter collection
  • NB-IoT backhaul to Magistrala
  • GNSS (via SIM7080G) for asset geo-tagging where needed

Cold Chain / Asset Tracking (concept)

Concept — validated at radio level (NB-IoT + GNSS available), enclosure/power/sensor integration not yet specified in A0 hardware.

  • Temperature/humidity sensing over BLE/802.15.4
  • GNSS tracking via SIM7080G
  • Battery-powered operation

Deployment Configurations

Standalone Gateway

  • Use: Data collection over on-board Wi-Fi 6 / BLE / 802.15.4
  • Power: USB-C, external supply, or battery with charging
  • Backhaul: Add SIM7080G, WMBUS, or E07-400M10S module in BUS1/BUS2 as needed
  • Complexity: Minimal

Cellular Backhaul Gateway

  • Use: Meter or sensor collection with NB-IoT/LTE-M uplink where no Wi-Fi exists
  • Modules: WMBUS or E07-400M10S on BUS1 for collection, SIM7080G on BUS2 for backhaul
  • Power: External supply with battery backup for resilience
  • Complexity: Moderate — two modules share SPI/I2C, so stagger bus access in firmware

Battery-Powered Field Node

  • Use: Remote metering or asset tracking with GNSS geo-tagging
  • Modules: SIM7080G alone (cellular + GNSS via J4 LTE and J3 GNSS antennas, nano-SIM in U3)
  • Power: Battery on the JST connector with MCP73831 charging; budget for cellular transmit bursts (see SIM7080G)
  • Complexity: Low hardware, careful power budgeting required

On this page